-
1. Application of Knife Gate Valve 1. Mining, iron and steel industry: used for coal, slag slurry, etc; 2. Purification device: used for waste water, mud, dirt and clarified water with suspended solids; 3. Paper industry: used for pulp and feed water mixture of any concentration; 4. Ash removal of power station: used for ash slurry. 2. Performance of Knife Gate Valve 1. Local and remote control, r...
View More
-
Today, Dervos takes you to know which components of soft seal gate valve are prone to leakage and how to prevent and remedy it well. 1.Leakage at Gate Valve Connection First, we should check whether the connecting bolts between gate valves are tightened, ensure that the sealing gasket ring in it is fully combined with the flange sealing groove surface. Secondly, if leakage has occurred, please do ...
View More
-
What are the main reasons for the damage of the sealing surface of the high-pressure ball valve during its use? Let Dervos introduce it to you! 1. Mechanical Damage During the opening and closing process, the sealing surface will be scratched, bumped, squeezed and other damages. The atoms between the two sealing surfaces penetrate each other under the action of high pressure, resulting in ad...
View More
-
The valve body, bonnet and wedge (disc) are the main parts of the valve, which directly bear the medium pressure. The materials used must comply with the provisions of "pressure and temperature rating of the valve". Common materials are as follows: 1. Grey Cast Iron Grey cast iron is suitable for water, steam, air, gas and oil media with nominal pressure PN ≤ 1.0MPa and temperature between -...
View More
-
After selecting a suitable valve, it is necessary to install, maintain and operate it correctly, so as to give full play to its efficiency. The quality of valve installation directly affects its use, so it must be paid attention to carefully. 1. Direction Many valves have directionality, such as globe valve, throttle valve, pressure relief valve, check valve, etc. If installed reversely, it will a...
View More
-
1. Hazards (1) Damage to the valve itself The strength of valve shell, bonnet and stem parts is generally designed according to the nominal pressure of the valve. In case of abnormal pressure rise, the opening pressure will be doubled, resulting in the service stress of relevant parts to be doubled. When the actual stress of the material exceeds the allowable stress, the high stress part wil...
View More
