-
Valve actuator is a device for operating and connecting valve. The device can be driven by power source of electric power, air pressure, hydraulic pressure or other combination, and its motion process can be controlled by the stroke, torque or axial thrust. Because the actuator working characteristics and utilization rate depend on the valve type, the working specifications, and the position of th...
View More
-
To understand the difference between globe valve and stop check valve, we should first figure out what is a stop check valve. Stop check valve combines the functions of a general globe valve and check valve, which means besides isolating and regulating the flow rate, it can also prevent reverse flow. From the appearance, globe valve and stop check valve almost look the same. The main difference li...
View More
-
An axial flow silent check valve’s disc is held in place by a spring. This upgraded structure design brings about many advantages. First, as its name indicates, the streamlined axial flow path through full-port expanded body prevent turbulence, erosion and vibration, which eliminate the process downtime and maintenance cost. Second, the full port passage and high-pressure recovery of the venturi-s...
View More
-
Gate Valve is the most widely used one among all types of valves. Gate Valve, whose disc or wedge moves vertically along the axis of the channel, has the same basic function of other valves, turning on or turning off channels. In the pipeline, it is used as a piece to connect and cut off the media inside. What is worthy to be noted is that an ordinary gate valve usually opens or close pipeline com...
View More
-
If the medium remained in the cavity after the cryogenic gate valve is closed, the residue will gradually absorb the heat in the air and re-gasify. After the gasification, it will expand violently up to 600 times and generate extremely high pressure on the valve, which is called 'abnormal boost'. When the unusual occurrence happens, the wedge will be pressed firmly onto the seat and can’t be opene...
View More
-
For high-pressure piping systems where multiple pumps are used together, the problem of water hammer in the piping system is even more acute. Water hammer is a pressure wave of the ever-changing flow in a pressure pipe, which is a hydraulic shock caused by a pressure rise or fall due to the change in the fluid flow rate in the pressure pipe. Water hammer is the combined result of the inc...
View More
