-
The wafer ball valve is a valve widely used in industrial pipeline systems, recognized for its compact structure and efficient performance. Advantages of Wafer Ball Valves 1. Compact Design: The wafer ball valve adopts a wafer-type design, with its valve body clamped between two sections of piping using bolts. Compared to traditional flanged ball valves, the wafer ball valve has a more compact str...
View More
-
When installing plug valves, it is important to consider the following aspects to ensure their normal operation and prolong their service life: 1. Selecting the Appropriate Valve Type: - The installation position should facilitate operation, maintenance, and inspection. - Consider the compatibility with other pipeline equipment and the impact of surrounding environmental conditions. - Select the a...
View More
-
Y-shaped ball valves are widely used in many industrial applications due to their low flow resistance, high flow rate, and good sealing performance. However, like any mechanical device, Y-shaped ball valves may also experience some malfunctions during use. 1. Common faults and cause analysis ①Leakage Leakage is one of the most common faults of Y-shaped ball valves, mainly manifested as poor sealin...
View More
-
In industrial applications, ball valves are widely used in fluid control systems due to their simple operation and reliable performance. Among them, Orbit Ball Valves and conventional ball valves are two common types. Although they may appear similar, there are significant differences in their structural design, operating principles, application scenarios, and performance. 1. Structural Design Orb...
View More
-
Plug valves and gate valves are two common industrial valves that differ significantly in their structure, working principles, applications, and other aspects. 1. Structure l Plug Valve: -Key components include the valve body, plug, and handle. -The plug is cylindrical or conical, with one or more through-holes inside. -Fluid flow is controlled by rotating the plug. l Gate Valve: -Key ...
View More
-
Valves are the most common equipment in chemical enterprises. Installing valves may seem easy, but if not carried out according to relevant technical standards, it can lead to safety accidents. Today, we would like to share some experience and knowledge about valve installation with you. I. Conduct a water pressure test during winter construction at negative temperatures. Consequence: Due to the r...
View More
