-
If the medium remained in the cavity after the cryogenic gate valve is closed, the residue will gradually absorb the heat in the air and re-gasify. After the gasification, it will expand violently up to 600 times and generate extremely high pressure on the valve, which is called 'abnormal boost'. When the unusual occurrence happens, the wedge will be pressed firmly onto the seat and can’t be opene...
View More
-
Bronze and brass are two of the most common materials used to produce valves. This preference comes because both metals are quite malleable. They both are artificially made from natural metallurgical elements: brass is made from copper and zinc, while another is made primarily from copper and tin. Each metal offers valves numerous and various advantages...
View More
-
There are four common types of plug valves, each of which has specific characteristics and advantages. Lubricated plug valve The lubrication plug valve uses lubricant to reduce frictions and make each port tightly sealed. Lubricants are basicly base oils that increase the viscosity of moving parts, such as amorphous or fumed silica, which are injected between the valve plug surface and the valve b...
View More
-
The V-type ball valve is a single-seat ball valve with a metal seat. The adjustment performance is the best in the ball valves, whose flow characteristics are equal percentages, and the adjustable ratio is up to 100:1. It has a shearing action between the V-shaped slit and the metal seat, and is especially suitable for media containing fibers, tiny solid particles, and slurry. During the...
View More
-
The V-type ball valve combines the optimal control characteristics of the ball valve and the butterfly valve. Its development is closely related to the advancement of technology. Today, the product is widely used because it has the following advantages. (1) The integral valve body, without any pipe flange joints, avoids the influence of pipe or bolt stress on the sealing performance of the va...
View More
-
Every heating contractor moving into an empty boiler room ---- This room is usually the size of a small closet ---- must have his piping system outlined in his mind around the type of boiler and heat distribution system he will be installing. One of the main criteria for determining the plumbing configuration is the little check valve. First, let's look at the three most common types of check valv...
View More
