-
The sealing damage of the steam trap valve is the main cause of internal leakage of the valve. There are many reasons for valve sealing failure, among which the failure of the sealing pair composed of the valve core and valve seat is the main reason. There are many reasons that affect the damage of the valve sealing surface, including mechanical wear caused by incorrect selection, high-speed erosi...
View More
-
General Requirements 1. The industrial valve should be located in a place that is easy to operate, install, and maintain. The valves on rows of pipelines (such as those entering and exiting the device) should be centrally arranged to facilitate the installation of operating platforms and ladders. 2. Some valve positions have process operation requirements and locking requirements, and should be ar...
View More
-
Given the wide variety of steam traps and their varying operating characteristics. Therefore, users often encounter difficulties when selecting steam traps. How to choose the correct steam trap to smoothly discharge condensate from the steam pipeline has become a challenge. The key considerations for selecting a steam trap include temperature and pressure range, drainage capacity, industrial valve...
View More
-
1. Non rising stem gate valve: The stem nut is located inside the valve body and in direct contact with the medium. When opening and closing the gate, rotate the valve stem to achieve this. The advantage of this structure is that the height of the gate valve remains constant, so the installation space is small, making it suitable for gate valves with large diameters or limited installation space. ...
View More
-
1. If a water hammer occurs in the steam main pipe, it is necessary to immediately and slowly close the valve, cut off steam flow, and the water hammer may stop. Wait for the water hammer to stop, then slowly open the valve. If the valve is closed and the water hammer still does not stop, it indicates that the wave shaped water hammer is formed due to sudden condensation of steam. When the condens...
View More
-
Ball valves are mainly used in pipelines to cut off, distribute, and change the direction of medium flow. The ball valve designed with a V-shaped opening also has good flow regulation function. The opening and closing component of a ball valve is a sphere, which rotates 90 degrees around the axis of the valve stem to achieve the purpose of opening and closing. Ball valves have the advantages of lo...
View More
