-
1. Before installation, it is necessary to carefully check whether the logo and certificate of conformity of the butterfly valve meet the requirements for use. After verification, cleaning should be carried out. 2. Butterfly valves can be installed at any position on the equipment pipeline. However, if there is a transmission device, it should be installed vertically, that is, the transmission dev...
View More
-
1. Non rising stem gate valve: The stem nut is located inside the valve body and in direct contact with the medium. When opening and closing the gate, rotate the valve stem to achieve this. The advantage of this structure is that the height of the gate valve remains constant, so the installation space is small, making it suitable for gate valves with large diameters or limited installation space. ...
View More
-
1. If a water hammer occurs in the steam main pipe, it is necessary to immediately and slowly close the valve, cut off steam flow, and the water hammer may stop. Wait for the water hammer to stop, then slowly open the valve. If the valve is closed and the water hammer still does not stop, it indicates that the wave shaped water hammer is formed due to sudden condensation of steam. When the condens...
View More
-
Ball valves are mainly used in pipelines to cut off, distribute, and change the direction of medium flow. The ball valve designed with a V-shaped opening also has good flow regulation function. The opening and closing component of a ball valve is a sphere, which rotates 90 degrees around the axis of the valve stem to achieve the purpose of opening and closing. Ball valves have the advantages of lo...
View More
-
Butterfly valve, also known as flap valve, is a simple regulating valve that can be used for switching control of low-pressure pipeline media. Butterfly valve refers to a type of valve in which the closing element (disc or disc) is a disc that rotates around the valve axis to achieve opening and closing. Butterfly valves can be used to control the flow of various types of fluids such as air, water...
View More
-
Valves used underground are mainly used in pipeline systems to control the flow, pressure, and direction of fluids. Different types of valves have different functions and uses in underground applications. The following are some common types of valves used underground: Gate Valve: Gate valve is a common type of valve, typically used for fully open or fully closed applications, rather than for regul...
View More
