-
3. The influence of pressure difference before and after valve on sealing performance Theoretically, the pre- and post-valve pressure difference and leakage are proportional. However, the test proved that, under the same conditions, the increase in leakage is more than the increase in pressure difference. 4. The influence of sealing surface material and its treatment state on sealing performance T...
View More
-
(6) Effect of surface hydrophilicity on sealing property The hydrophilicity of the surface affects the amount of leakage due to the characteristics of the capillary. When there is a thin film of oil on the sealing surface, it is necessary to increase the pressure of the water passing through the gap. Due to the good hydrophilicity of the metal surface, kerosene can easily penetrate the gap between...
View More
-
For trunnion-mounted ball valve, there is a metal seat ring and a soft seat insert to ensure the sealing performance of seat. The seat inserts are element mounted inside a metal seat ring and perform the same sealing functions as seat ring. There are mainly two types of seat insert materials, elastomeric and thermoplastic. Elastomeric seat insert is softer to achieve zero leakage of ball valve. Wh...
View More
-
Metal seated butterfly valve is that both sides of the seal are made of metal material or other hard materials. This seal has relatively poor sealing performance, but is resistant to high temperatures, abrasion and mechanical properties. Metal seated is often combined of such as: steel + steel, steel + copper, steel + graphite, steel + alloy steel. The steel here may also be cast iron, c...
View More
-
As a component used to realize the on-off and flow control of pipeline system, butterfly valve has been widely used in many fields such as petroleum, chemical industry, metallurgy, hydropower and so on. There is an advanced butterfly valve: three eccentric metal hard seal butterfly valve. The valve body and the valve seat are connected components, the sealing surface of the valve seat is overlaid ...
View More
-
Today, Dervos takes you to know which components of soft seal gate valve are prone to leakage and how to prevent and remedy it well. 1.Leakage at Gate Valve Connection First, we should check whether the connecting bolts between gate valves are tightened, ensure that the sealing gasket ring in it is fully combined with the flange sealing groove surface. Secondly, if leakage has occurred, please do ...
View More
