-
Full welded ball valve is a typical narrow gap submerged arc welding product, which involves the knowledge of materials, welding technology, automatic development of welding equipment and design of pipeline ball valve. The valve seat of full welded ball valve is composed of carbonized Teflon sealing ring and butterfly spring, so it has strong adaptability to pressure and temperature changes. Appli...
View More
-
Soft seal gate valves are usually used as industrial valves. The deformation compensation function is generated by the overall rubber coating of the gate, which achieves good sealing effect, overcomes the problems of poor sealing, water leakage and rust of general gate valves, saves installation space more effectively. Advantages of Soft Seal Gate Valve: (1) Low fluid resistance The medium c...
View More
-
The valve body, bonnet and wedge (disc) are the main parts of the valve, which directly bear the medium pressure. The materials used must comply with the provisions of "pressure and temperature rating of the valve". Common materials are as follows: 1. Grey Cast Iron Grey cast iron is suitable for water, steam, air, gas and oil media with nominal pressure PN ≤ 1.0MPa and temperature between -...
View More
-
After selecting a suitable valve, it is necessary to install, maintain and operate it correctly, so as to give full play to its efficiency. The quality of valve installation directly affects its use, so it must be paid attention to carefully. 1. Direction Many valves have directionality, such as globe valve, throttle valve, pressure relief valve, check valve, etc. If installed reversely, it will a...
View More
-
1. Hazards (1) Damage to the valve itself The strength of valve shell, bonnet and stem parts is generally designed according to the nominal pressure of the valve. In case of abnormal pressure rise, the opening pressure will be doubled, resulting in the service stress of relevant parts to be doubled. When the actual stress of the material exceeds the allowable stress, the high stress part wil...
View More
-
Soft seal and hard seal are judged according to the sealing material of the valve seat. Soft seal: one side of the sealing pair is made of metal material, and the other side is made of elastic non-metallic material. This seal has good sealing performance, but it is not resistant to high temperature and abrasion, and has poor mechanical property. Hard seal: both sides of the sealing pair ...
View More
