-
Given the wide variety of steam traps and their varying operating characteristics. Therefore, users often encounter difficulties when selecting steam traps. How to choose the correct steam trap to smoothly discharge condensate from the steam pipeline has become a challenge. The key considerations for selecting a steam trap include temperature and pressure range, drainage capacity, industrial valve...
View More
-
1. Before installation, it is necessary to carefully check whether the logo and certificate of conformity of the butterfly valve meet the requirements for use. After verification, cleaning should be carried out. 2. Butterfly valves can be installed at any position on the equipment pipeline. However, if there is a transmission device, it should be installed vertically, that is, the transmission dev...
View More
-
Structurally Gate valves can rely on medium pressure to tightly close the sealing surface, thereby achieving the effect of no leakage. When opening and closing, the sealing surface of the valve core and valve seat always come into contact and rub against each other, so the sealing surface is prone to wear. When the gate valve is close, the pressure difference between the front and back of the pipe...
View More
-
1. Non rising stem gate valve: The stem nut is located inside the valve body and in direct contact with the medium. When opening and closing the gate, rotate the valve stem to achieve this. The advantage of this structure is that the height of the gate valve remains constant, so the installation space is small, making it suitable for gate valves with large diameters or limited installation space. ...
View More
-
1. If a water hammer occurs in the steam main pipe, it is necessary to immediately and slowly close the valve, cut off steam flow, and the water hammer may stop. Wait for the water hammer to stop, then slowly open the valve. If the valve is closed and the water hammer still does not stop, it indicates that the wave shaped water hammer is formed due to sudden condensation of steam. When the condens...
View More
-
Ball valves are mainly used in pipelines to cut off, distribute, and change the direction of medium flow. The ball valve designed with a V-shaped opening also has good flow regulation function. The opening and closing component of a ball valve is a sphere, which rotates 90 degrees around the axis of the valve stem to achieve the purpose of opening and closing. Ball valves have the advantages of lo...
View More
