-
Direction When installing the butterfly valve, pay attention to the installation arrow on the valve body. If it is two-way pressure, it can achieve two-way sealing, and there is no installation direction. Water Inlet Configuration There are elbows and T-shaped pipes on the water inlet side of the butterfly valve, which cause the fluid to bend and distribute unevenly. When the fluid flows into the ...
View More
-
Working principle of globe valves Assuming there is a water supply pipeline with a cover, water is injected from the bottom of the pipeline and discharged towards the direction of the pipe mouth, and the cover of the outlet pipe mouth is equivalent to the closing part of the globe valve. If you lift the pipe cover up with your hand, the water will be discharged outward. If you cover the pipe cover...
View More
-
(1) Selection principle of valves for water supply pipelines 1. When the diameter of the pipeline is less than 50mm, a globe valve should be used; When the pipeline diameter is greater than 50mm, gate or butterfly valves should be used; 2. When it is necessary to adjust the flow and water pressure, regulating valves and globe valves should be used; 3. For parts with low water flow resistance (such...
View More
-
304 austenitic stainless steel (new standard 06Cr19Ni10 steel, old standard 0Cr18Ni9 steel) is widely used in industries such as petrochemical, metallurgical machinery, aerospace, food processing, instruments, household appliances, and hardware manufacturing due to its good toughness, plasticity, weld-ability, corrosion resistance, and non-magnetism at room and low temperatures. The reason why 304...
View More
-
At present, the commonly used hardening processes for the surface of metal hard sealed ball valves mainly include the following: (1) The surface of the sphere is welded (or sprayed) with hard alloy, with a hardness of over 40HRC. The process of surfacing hard alloy on the surface of the sphere is complex, with low production efficiency, and large-scale surfacing can easily cause deformation of the...
View More
-
There are many types of structures for ball valves, mainly composed of valve seats, balls, sealing rings, valve stems, and other driving devices. It is used on pipelines to shut off, distribute, adjust flow rates, and change the flow direction of the medium. O-type Ball Valves The body of the O-ring ball valve is equipped with a ball with an intermediate through hole inside, and there is a through...
View More
