-
There are many types of structures for ball valves, mainly composed of valve seats, balls, sealing rings, valve stems, and other driving devices. It is used on pipelines to shut off, distribute, adjust flow rates, and change the flow direction of the medium. O-type Ball Valves The body of the O-ring ball valve is equipped with a ball with an intermediate through hole inside, and there is a through...
View More
-
1. Surface condition of sealing surface The shape and surface roughness of the valve sealing surface have a certain impact on sealing performance, and a smooth surface is beneficial for sealing. Soft gaskets are prone to deformation and are not sensitive to surface conditions. For hard gaskets, the surface condition has a significant impact. 2. Contact width of sealing surface The larger the conta...
View More
-
Just as sound can have a negative impact on the human body, certain frequencies can also cause serious damage to industrial equipment. High noise levels usually cause vibration and may damage equipment such as pipelines and instruments. With the passage of time, valve components deteriorate, and the cavitation generated by the valve is prone to serious damage. This type of damage is mostly caused ...
View More
-
In steam and condensate systems, garbage and debris in pipelines often cause damage to equipment, such as scale, rust, welding slag, and other solid particles, which may enter the pipeline system. Strainers can filter out solid particles in liquids or gases, not only protecting equipment from damage, but also reducing equipment downtime and maintenance time. Strainers are generally installed upstr...
View More
-
The sealing damage of the steam trap valve is the main cause of internal leakage of the valve. There are many reasons for valve sealing failure, among which the failure of the sealing pair composed of the valve core and valve seat is the main reason. There are many reasons that affect the damage of the valve sealing surface, including mechanical wear caused by incorrect selection, high-speed erosi...
View More
-
General Requirements 1. The industrial valve should be located in a place that is easy to operate, install, and maintain. The valves on rows of pipelines (such as those entering and exiting the device) should be centrally arranged to facilitate the installation of operating platforms and ladders. 2. Some valve positions have process operation requirements and locking requirements, and should be ar...
View More
